 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Preliminary RF2367 PCS CDMA/TDMA/GSM1800 3V PA DRIVER AMPLIFIER 4 Typical Applications * TDMA/CDMA/FM PCS Tx Amplifier * Low Noise Transmit Driver Amplifier * 2.4GHz WLAN Systems * GSM1800 Driver Amplifier * General Purpose Amplification * Commercial and Consumer Systems Product Description The RF2367 is a low noise CDMA/TDMA/GSM PA driver amplifier with a very high dynamic range designed for transmit digital PCS applications with frequency ranges between 1700MHz and 2000MHz. The device functions as an outstanding PA driver amplifier in the transmit chain of digital subscriber units where low transmit noise power is a concern. The IC includes a power down feature that can be used to completely turn off the device. The RF2367 is featured in a standard SOT23-6 plastic package. PI N 1 1.80 1.40 .50 .35 3.10 2.70 .10 MAX. 4 GENERAL PURPOSE AMPLIFIERS 67XY 1.90 3.00 2.60 1.30 1.00 .90 .70 9 1 All dimensions in mm. .25 .10 .37 MIN. Optimum Technology Matching(R) Applied Si BJT Si Bi-CMOS u Package Style: SOT23-6 GaAs HBT SiGe HBT GaAs MESFET Si CMOS Features * Low Noise and High Intercept Point * Adjustable Bias Current * Power Down Control * Single 2.5V to 6.0V Power Supply * 150MHz to 2500MHz Operation * Extremely Small SOT23-6 Package GND 1 6 RF OUT GND 2 5 GND RF IN 3 4 PD Ordering Information RF2367 RF2367 PCBA PCS CDMA/TDMA/GSM1800 3V PA Driver Amplifier Fully Assembled Evaluation Board Functional Block Diagram RF Micro Devices, Inc. 7625 Thorndike Road Greensboro, NC 27409, USA Tel (336) 664 1233 Fax (336) 664 0454 http://www.rfmd.com Rev A1 010619 4-193 RF2367 Absolute Maximum Ratings Parameter Supply Voltage Input RF Level Storage Temperature Preliminary Rating -0.5 to +8.0 +10 -40 to +150 Unit VDC dBm C Caution! ESD sensitive device. RF Micro Devices believes the furnished information is correct and accurate at the time of this printing. However, RF Micro Devices reserves the right to make changes to its products without notice. RF Micro Devices does not assume responsibility for the use of the described product(s). Parameter Operating Range Overall Frequency Range Supply Voltage (VCC) Power Down Voltage (VPD) Total Current Consumption Operating Ambient Temperature Input Impedance Output Impedance Specification Min. Typ. Max. 150 to 2500 2.5 2.7 24 -40 50 50 37 6.0 2.9 0.9 45 10 +85 Unit MHz V V V mA A o Condition 4 GENERAL PURPOSE AMPLIFIERS For normal operation For power down operation VCC =3.0V, VPD =2.8V VCC =3.0V, VPD <0.9V C All parameters measured from evaluation board with T = 25C, RF=1880MHz, VCC =3.0V, VPD =2.8V 1880MHz Performance Gain Output IP3 Noise Figure Reverse Isolation Input VSWR Output VSWR Output P1dB 20 +20 32 21.5 +24 2.2 34 1.9:1 1.5:1 +14 23 2.5 2:1 2:1 +15 dBm dB dBm dB dB Using External LC network used on Evaluation Board +13 4-194 Rev A1 010619 Preliminary Pin 1 2 3 Function GND GND RF IN Description Ground connection. Keep traces physically short and connect immediately to ground plane for best performance. Same as pin 1. RF input pin. This pin is DC coupled and internally matched to a <2:1 VSWR at 1880MHz. RF2367 Interface Schematic PD RF IN TO OUTPUT STAGE 4 PD 5 6 GND RF OUT Amplifier Output pin. This pin is an open-collector output. It must be biased to either VCC or pin 4 through a choke or matching inductor. This pin is typically externally matched to 50 with a shunt bias/matching inductor and series blocking/matching capacitor. Refer to application/evaluation board schematics. Rev A1 010619 4-195 GENERAL PURPOSE AMPLIFIERS See pin 3. Power Down for the IC. VPD = 2.8V +/- 0.1V turns on the Part. VPD <0.9V turns off the Part. Lower threshold for device operation is approximately 1.2V. External RF bypassing is required. The trace length between the pin and the bypass capacitors should be minimized. The ground side of the bypass capacitors should connect immediately to ground plane. Nominal current for this pin for VPD = 2.8V is 8mA typical. Same as pin 1. 4 RF2367 Application Schematic: ~1880 MHz Operation Preliminary 220 pF 10 nF VCC 4.7 nH 1 6 1 pF RF OUT 4 GENERAL PURPOSE AMPLIFIERS 6 pF RF IN 2 5 3 4 220 pF 10 nF PD Evaluation Board Schematic (Download Bill of Materials from www.rfmd.com.) C7 4.7 F P1-1 1 2 P1-3 3 VCC GND PD C5 220 pF L1 4.7 nH 1 6 C4 1 pF 2 50 strip C3 6 pF 3 4 C2 220 pF 2367400- C6 10 nF VCC 50 strip J2 RF OUT 5 R1 0 PD C1 10 nF J1 RF IN 4-196 Rev A1 010619 Preliminary Evaluation Board Layout Board Size 0.948" x 1.063" Board Thickness 0.031", Board Material FR-4 RF2367 4 GENERAL PURPOSE AMPLIFIERS Rev A1 010619 4-197 RF2367 Gain versus VCC 23.0 Preliminary OIP3 versus VCC 31.0 VPD = 2.8 V, Frequency = 1880 MHz VPD = 2.8 V, Frequency = 1880 MHz 22.5 30.0 22.0 29.0 21.5 OIP3 (dBm) Gain (dB) 28.0 OIP3, -30 OIP3, 25 21.0 Gain, -30 Gain, 25 27.0 OIP3, 85 4 GENERAL PURPOSE AMPLIFIERS 20.5 Gain, 85 20.0 26.0 19.5 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 25.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 VCC (V) VCC (V) Noise Figure versus VCC 3.5 Output P1dB versus VCC 17.0 VPD = 2.8 V, Frequency = 1880 MHz VPD = 2.8 V, Frequency = 1880 MHz 16.0 3.0 15.0 Output P1dB (dBm) Noise Figure (dB) 14.0 2.5 13.0 NF, -30 NF, 25 2.0 NF, 85 12.0 OP1dB, -30 11.0 OP1dB, 25 OP1dB, 85 1.5 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 10.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 VCC (V) VCC (V) ICC versus VCC 43.0 41.0 39.0 37.0 35.0 33.0 31.0 29.0 Icc+Ipd, -30 27.0 25.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Icc+Ipd, 25 Icc+Ipd, 85 20.5 2.70 2.75 22.5 Gain versus VPD 23.0 VPD = 2.8 V, Frequency = 1880 MHz VCC = 3.0 V, Frequency = 1880MHz Gain (dB) 22.0 ICC (mA) Gain, -30 21.5 Gain, 25 Gain, 85 21.0 2.80 2.85 2.90 VCC (V) VPD (V) 4-198 Rev A1 010619 Preliminary OIP3 versus VPD 30.50 30.00 29.50 29.00 3.00 RF2367 Noise Figure versus VPD 3.50 VCC = 3.0 V, Frequency = 1880 MHz VCC = 3.0 V, Frequency = 1880 MHz Noise Figure (dB) OIP3 (dBm) 28.50 28.00 27.50 27.00 26.50 26.00 25.50 2.70 OIP3, -30 OIP3, 25 OIP3, 85 2.50 2.00 1.50 NF, -30 NF, 25 NF, 85 4 2.90 2.75 2.80 2.85 2.90 1.00 2.70 2.75 2.80 2.85 VPD (V) VPD (V) Output P1dB versus VPD 14.20 IPD versus VPD 10.20 10.00 9.80 VCC = 3.0 V, Frequency = 1880 MHz VCC = 3.0 V, Frequency = 1880 MHz 14.00 13.80 9.60 Output P1dB (dBm) 13.60 9.40 13.40 OP1dB, -30 13.20 OP1dB, 25 OP1dB, 85 13.00 IPD (mA) 9.20 9.00 8.80 8.60 Ipd, -30 Ipd, 25 Ipd, 85 12.80 8.40 8.20 2.70 12.60 2.70 2.75 2.80 2.85 2.90 2.75 2.80 2.85 2.90 VPD (V) VPD (V) Gain versus Frequency 23.0 Input Impedance versus Frequency 2.10 VCC = 3.0 V, VPD = 2.8 V VCC = 3.0 V, VPD = 2.8 V 22.5 2.05 2.00 22.0 Input VSWR Gain (dB) 1.95 21.5 Gain, -30 21.0 Gain, 25 Gain, 85 1.90 1.85 S11, -30 20.5 1.80 S11, 25 S11, 85 20.0 1850.0 1860.0 1870.0 1880.0 1890.0 1900.0 1910.0 1.75 1850.00 1860.00 1870.00 1880.00 1890.00 1900.00 1910.00 Frequency (MHz) Frequency (MHz) Rev A1 010619 4-199 GENERAL PURPOSE AMPLIFIERS RF2367 Output Impedance versus Frequency 2.05 Preliminary VCC = 3.0 V, VPD = 2.8 V 2.00 1.95 Output VSWR 1.90 1.85 4 GENERAL PURPOSE AMPLIFIERS 1.80 S22, -30 1.75 S22, 25 S22, 85 1.70 1850.00 1860.00 1870.00 1880.00 1890.00 1900.00 1910.00 Frequency (MHz) 4-200 Rev A1 010619 |
Price & Availability of RF2367PCBA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |